Shown: Navy
BaysideStyle 6200 · Long Sleeve Tees
Men's USA-Made Tall Long Sleeve T-Shirt
A blank long sleeve tee from the Bayside line, offered in Navy and sizes MT–3XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for screen printing and DTG printing
- 100% cotton at 6.1 oz/yd²
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Navy
Navy
Available sizes
Availability — Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| MT | Limited | — | |
| LT | In Stock | — | |
| XLT | In Stock | — | |
| 2XLT | In Stock | — | |
| 3XLT | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% cotton
- Fabric weight
- 6.1 oz/yd²
- Fabric type
- Not stated
- Yarn
- open-end
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- MT–3XLT
- Colors
- 1
- Country of origin
- United States
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Excellent
Cotton-dominant knit takes plastisol and water-based ink cleanly with standard cure settings.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
DTG printing
Excellent
High-cotton smooth knit is the ideal DTG substrate.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes MT–3XLT.
Garment measurements in inches, laid flat.
| Measurement | MT | LT | XLT | 2XLT | 3XLT |
|---|---|---|---|---|---|
| Body Length | 33 | 34 | 35 | 36 | |
| Chest Width (Laid Flat) | 22 | 24 | 26 | 28 |
Fabric and construction
Manufacturer highlights
- 6.1 oz./yd², 100% cotton
- Pre-shrunk
- Open-end yarn
- Shoulder-to-shoulder taping
- Double-needle stitched sleeves and bottom hem
Country of origin
Made in United States.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 100% cotton
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
- · Same fabric: 100% cotton
- · Similar weight (6 vs 6.1 oz)
- · Also Excellent for screen printing
- · Same fabric: 100% cotton
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
- · Same fabric: 100% cotton
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for screen printing
Terms used on this page
- Preshrunk
- Preshrunk means a garment was run through a shrink-control process at the mill, so most of the size change a first wash would cause happened before it shipped.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.