Shown: Safety Green
Unisex USA-Made 50/50 Pocket T-Shirt
A blank t-shirt from the Bayside line, offered in 2 colors and sizes S–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester at 5.4 oz/yd²
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Safety Green
Safety Green
Safety Orange
Available sizes
Availability — Safety Green
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — | |
| 4XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester
- Fabric weight
- 5.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–4XL
- Colors
- 2
- Country of origin
- United States
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–4XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|
| Body Length | 27 | 28 | 30 | 31 | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 18 | 20 | 22 | 24 | 26 | 28 | 30 |
Fabric and construction
Manufacturer highlights
- 5.4 oz./yd², 50/50 cotton/polyester
- Shoulder-to-shoulder taping
- Left chest pocket
- Double-needle stitched bottom hem
Country of origin
Made in United States.
Shown for the Safety Green colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.4 vs 5.4 oz)
- · Covers S–4XL
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.4 vs 5.4 oz)
- · Covers S–5XL
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.5 vs 5.4 oz)
- · Covers S–3XL
- · Same fabric: 50/50 cotton/polyester
- · Similar weight (5.5 vs 5.4 oz)
- · Covers S–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Taped Neck (Shoulder-to-Shoulder Taping)
- A taped neck is a strip of tape sewn over a garment's shoulder-to-shoulder seam to stop it from stretching out and smooth the seam against skin.