Badger 4605 Men's Pro-Compression Long Sleeve T-Shirt in Black — blank long sleeve tee, front view

Shown: Black

BadgerStyle 4605 · Long Sleeve Tees

Men's Pro-Compression Long Sleeve T-Shirt

A blank long sleeve tee from the Badger line, offered in 11 colors and sizes M–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.

  • 83/17 polyester/spandex moisture-management fabric
  • DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
  • Sublimation: conditional — test first.

Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.

Colors 11Black

  • Black

  • Burnt Orange

  • Forest

  • Graphite

  • Maroon

  • Navy

  • Purple

  • Red

  • Royal

  • Silver

  • White

Available sizes

MLXL2XL3XL

Availability Black

Availability by size for the Black colorway, as of the last catalog sync
SizeStatusLocal pickup (Chicagoland)Actions
MIn Stock
LLimited
XLLimited
2XLIn Stock
3XLIn Stock

Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.

Key specifications

Fabric composition
83/17 polyester/spandex moisture-management fabric
Fabric weight
Not stated
Fabric type
Not stated
Yarn
Not stated
Construction
Not stated
Label
Not stated
Cut for
Men's
Fit
Not stated
Sizes
M–3XL
Colors
11
Country of origin
Nicaragua
Sustainability
Not stated

Decoration compatibility

VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.

Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.

  • Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
  • Stretch content — use an ink with good elongation to avoid cracking.

Compatible with this fabric type at correct press temperature and pressure.

  • High press heat can affect polyester — test temperature and dwell time before a full run.
  • Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.

DTG printing

Not Recommended

Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.

  • Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.

Embroiders well with appropriate backing.

  • Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
  • Stretch fabric — hoop with light tension and use a ballpoint needle.

Standard HTV and transfers apply well at the correct temperature for this fiber mix.

  • Use low-temperature transfer material to avoid scorch or dye migration on polyester.
  • Verify transfer adhesion over moisture-management finishes.

Sublimation

Conditional

Partial polyester content gives muted, distressed color rather than full saturation.

  • Cotton content will not hold sublimation dye — expect a faded, vintage result.

Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.

Fit and sizing

Fit category not stated, cut for men's wear · sizes M–3XL.

Garment measurements in inches, laid flat.

MeasurementSMLXL2XL3XL
Body Length24 1/225 1/226 1/227 1/228 1/229 1/2
Chest Width (Laid Flat)14 1/21617 1/21920 1/222

Fabric and construction

Manufacturer highlights

Country of origin

Made in Nicaragua.

Shown for the White colorway; origin can vary by color and production run.

Recommended applications

Similar alternatives

View all 220 long sleeve tees

Terms used on this page

Polyester
Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
Spandex (Elastane)
Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
Self-fabric collar
A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
Badger 4605 Men's Pro-Compression Long Sleeve T-Shirt | VisePrint