Shown: Black
Men's Camo T-Shirt
A blank t-shirt from the Badger line, offered in 14 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% sublimated polyester
- 8-size run (XS–4XL)
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 14— Black
Black
Burnt Orange
Columbia Blue
Forest
Gold
Lime
Maroon
Navy
OD Green
Purple
Red
Royal
Sand
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% sublimated polyester
- Fabric weight
- Not stated
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS–4XL
- Colors
- 14
- Country of origin
- China, Nicaragua
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 29 | 30 | 31 | 32 | 33 | 34 | ||
| Chest Width (Laid Flat) | 19 | 21 | 23 | 25 | 27 | 29 |
Fabric and construction
Manufacturer highlights
- 100% sublimated polyester moisture-management/antimicrobial properties
- Badger sport paneled shoulder for maximum movement
- Self-fabric collar
- Double-needle stitched hem with tack
- Badger heat-seal logo on left sleeve
- Heat transfers are NOT recommended
About this blank
Printing on Sublimated Fabric: Printing over sublimated fabric can be achieved with ease, it’s always best to contact your ink manufacturer before printing. An under base is recommended with all inks. When curing ink do NOT exceed 320 degrees.
Designs: Designs with less fill and darker ink colors work best to block the pattern, lighter inks may allow the digital pattern to show through. Bold lines are recommended, fine lines will disappear into the pattern.
Country of origin
Made in China or Nicaragua.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Same fabric: 100% sublimated polyester
- · Also Excellent for sublimation
- · Also Excellent for sublimation
- · Covers S–4XL
- · Also Excellent for sublimation
- · Covers XS–4XL
- · Also Excellent for sublimation
- · Covers S–5XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Underbase
- An underbase is a layer of white (or light) plastisol printed first on dark garments so the colors on top stay bright instead of blending into the fabric.
- Curing
- Curing is heating printed plastisol ink to roughly 320°F for enough time that it fully cross-links into the fabric instead of just drying on the surface.