Shown: Black
Men's FitFlex French Terry Hooded Sweatshirt
A blank hooded sweatshirt from the Badger line, offered in 6 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 55/40/5 cotton/polyester/spandex moisture-management badgerblend fabric at 9.29 oz/yd²
- 8-size run (XS–4XL)
- ⚠ Sublimation: not recommended — Cotton-dominant fabric does not bond sublimation dye.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Charcoal
Navy
Oxford
Red
Royal
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | Limited | — | |
| 3XL | Limited | — | |
| 4XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 55/40/5 cotton/polyester/spandex moisture-management badgerblend fabric
- Fabric weight
- 9.29 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Classic
- Sizes
- XS–4XL
- Colors
- 6
- Country of origin
- Pakistan
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Blended fabric prints reliably; match the ink system to the dominant fiber.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Not Recommended
Cotton-dominant fabric does not bond sublimation dye.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Classic fit, cut for men's wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 26 | 27 | 28 | 29 | 30 | 31 | 31.5 | 32 |
| Chest Width (Laid Flat) | 17.5 | 18.5 | 20.5 | 22.5 | 24.5 | 26.5 | 28.5 | 30.5 |
Fabric and construction
Manufacturer highlights
- 9.29 oz./yd², 55/40/5 cotton/polyester/spandex moisture-management BadgerBlend fabric
- Classic fit
- Contrasting hood liner
- Badger “B” logo slider
- Slanted set-in front pocket with contrasting liner
- Badger Sport paneled shoulder for maximum movement
- Vented Hem
- Badger woven logo label on left pocket
Country of origin
Made in Pakistan.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 55/40/5 cotton/polyester/spandex moisture-management badgerblend fabric
- · Similar weight (9.29 vs 9.29 oz)
- · Classic fit
- · Similar fiber mix
- · Similar weight (9 vs 9.29 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (9 vs 9.29 oz)
- · Classic fit
- · Similar fiber mix
- · Similar weight (9 vs 9.29 oz)
- · Classic fit
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.
- Lined Hood (Two-Ply Hood)
- A lined hood is a hoodie hood built from two fabric layers instead of one, adding warmth, structure, and a hidden inner surface for contrast color or print.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.