Shown: Navy/ Grey Heather
Augusta SportswearStyle 6867 · Hoodies
Women's Eco Revive™ Three-Season Triblend Fleece Hooded Sweatshirt
A blank hooded sweatshirt from the Augusta Sportswear line, offered in 2 colors and sizes M–XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 51/42/7 recycled polyester/cotton/rayon at 6.5 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
- ⚠ Only 0 of 2 colors in stock at last sync.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Navy/ Grey Heather
Navy/ Grey Heatherout of stock
White/ Grey Heatherout of stock
Available sizes
Availability — Navy/ Grey Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Out of Stock | — | |
| L | Out of Stock | — | |
| XL | Out of Stock | — |
Last inventory sync: July 23, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 51/42/7 recycled polyester/cotton/rayon
- Fabric weight
- 6.5 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- M–XL
- Colors
- 2
- Country of origin
- Mexico
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes M–XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL |
|---|---|---|---|---|---|---|
| Body Length | 25 | 25 3/4 | 26 1/2 | 27 1/4 | 28 | 28 3/4 |
| Chest Circumference | 36 | 38 | 40 | 43 | 46 1/2 | 50 1/2 |
| Sleeve Length (From Center Back) | 30 1/2 | 31 1/4 | 32 | 32 3/4 | 33 1/2 | 34 1/4 |
Fabric and construction
Manufacturer highlights
- 6.5 oz./yd², 51/42/7 recycled polyester/cotton/rayon
- Three-panel hood with drawcord
- Pouch pocket
- Set-in sleeves with shoulder insert
- Ribbed-knit cuffs and bottom hem
- Hanger loop label
- Responsible Materials: contains 51% recycled polyester
Country of origin
Made in Mexico.
Shown for the Carbon Heather/ Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 51/42/7 recycled polyester/cotton/rayon
- · Similar weight (6.5 vs 6.5 oz)
- · Also Excellent for embroidery
- · Same fabric: 51/42/7 recycled polyester/cotton/rayon
- · Similar weight (6.5 vs 6.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (7 vs 6.5 oz)
- · Also Excellent for embroidery
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Three-panel hood
- A three-panel hood is a hood built from two side panels plus a center gore, giving it a rounder, more tailored profile than a flat two-piece hood.
- Drawcord
- A drawcord is the cord threaded through a hood or waistband casing that cinches a hoodie's fit, and its style and color are an easy customization option.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.