Shown: Black
Augusta SportswearStyle 6855 · Fleece
Unisex Eco Revive™ Polar Fleece Quarter-Zip Pullover
A blank fleece pullover from the Augusta Sportswear line, offered in 10 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 70/30 recycled polyester/polyester at 8 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 10— Black
Black
Dark Green
Graphite
Maroon
Navy
Olive
Oyster
Royal
Scarlet
Storm
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 70/30 recycled polyester/polyester
- Fabric weight
- 8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 10
- Country of origin
- China
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 1/2 | 29 1/4 | 30 | 30 3/4 | 31 1/2 | 32 1/4 |
| Chest Circumference | 40 | 44 | 48 | 52 | 56 | 60 |
| Sleeve Length (From Center Back) | 34 1/2 | 35 1/4 | 36 | 36 3/4 | 37 1/2 | 38 1/4 |
Fabric and construction
Manufacturer highlights
- 8 oz./yd², 70/30 recycled polyester/polyester
- Quarter-zip with storm flap and zipper garage
- Front zippered pockets with spandex binding detail
- Set-in sleeves
- Spandex bound cuffs
- Open bottom
- Hanger loop label
- Responsible Materials: contains 70% recycled polyester
Country of origin
Made in China.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Same fabric: 70/30 recycled polyester/polyester
- · Also Excellent for sublimation
- · Covers S–3XL
- · Same fabric: 70/30 recycled polyester/polyester
- · Also Excellent for sublimation
- · Covers XS–3XL
- · Similar weight (7.5 vs 8 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (8.4 vs 8 oz)
- · Also Excellent for embroidery
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Quarter-zip
- A quarter-zip is a pullover shirt or jacket with a short front zipper, usually 6 to 8 inches, that opens partway down the chest.
- Zipper garage (chin guard)
- A zipper garage, or chin guard, is a small fabric flap at the top of a zipper that shields the chin from the metal slider.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.