Shown: Black
Augusta SportswearStyle 5412 · Polos
Unisex Shadow Tonal Heather Polo
A blank polo from the Augusta Sportswear line, offered in 10 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% polyester at 4.25 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 10— Black
Black
Dark Green
Kelly
Maroon
Navy
Orange
Purple
Red
Royal
Silver
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | — | |
| M | In Stock | — | |
| L | Limited | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% polyester
- Fabric weight
- 4.25 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 10
- Country of origin
- Haiti, Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/2 |
| Chest Circumference | 39 | 43 | 47 | 51 | 55 | 59 |
Fabric and construction
Manufacturer highlights
- 4.25 oz./yd², 100% polyester heathered wicking knit top body, collar, and sleeves
- 3.4 oz./yd², 100% polyester wicking knit solid bottom body
- Wicks moisture away from the body
- Contrast self-fabric collar, placket and yoke
- Contrast set-in sleeves
- Double-needle hemmed sleeves and bottom
- Pad print label
Country of origin
Made in Haiti or Mexico.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.25 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.25 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4.5 vs 4.25 oz)
- · Also Excellent for sublimation
- · Same fabric: 100% polyester
- · Similar weight (4 vs 4.25 oz)
- · Also Excellent for sublimation
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Heather Fabric
- Heather fabric is knit or woven from a blend of dyed and undyed fiber, creating a mottled two-tone look that usually signals polyester content.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.