Shown: White/ Navy
Augusta SportswearStyle 422 · T-Shirts
Toddler Three-Quarter Sleeve Baseball Jersey
A blank t-shirt from the Augusta Sportswear line, offered in 2 colors in size 4T. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/50 cotton/polyester jersey knit at 4.8 oz/yd²
- Tear-away label for rebranding
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— White/ Navy
White/ Navy
White/ Red
Available sizes
Availability — White/ Navy
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| 4T | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/50 cotton/polyester jersey knit
- Fabric weight
- 4.8 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Infant/Toddler
- Fit
- Not stated
- Sizes
- 4T
- Colors
- 2
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Good
Cotton-rich blend prints acceptably; expect a softer, more vintage result than 100% cotton.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for infant/toddler wear · sizes 4T.
Garment measurements in inches, laid flat.
| Measurement | 4T |
|---|---|
| Body Length | 17 1/2 |
| Chest Circumference | 28 |
| Sleeve Length (From Center Back) | 14 1/4 |
Fabric and construction
Manufacturer highlights
- 4.8 oz./yd², 50/50 cotton/polyester jersey knit
- Contrast-color 1x1 rib collar and raglan sleeves
- Double-needle hemmed sleeves
- Serged fishtail bottom
- Tear away label
Country of origin
Made in Mexico.
Shown for the White/ Navy colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/50 cotton/polyester jersey knit
- · Similar weight (4.8 vs 4.8 oz)
- · Similar fiber mix
- · Similar weight (4.5 vs 4.8 oz)
- · Covers 2T–5/6
- · Similar fiber mix
- · Similar weight (4.5 vs 4.8 oz)
- · Covers 2T–5/6
- · Similar fiber mix
- · Similar weight (4.4 vs 4.8 oz)
- · Covers 2T–4T
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Jersey Knit
- Jersey knit is a single-knit fabric construction, smooth on the face and textured on the back, used for nearly every t-shirt at 4.2 to 6.1 ounces per yard.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Raglan Sleeve
- A raglan sleeve is cut in one piece with the shoulder, creating a diagonal seam from underarm to collar instead of a rounded shoulder seam.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.