Shown: Black Heather
Augusta SportswearStyle 3076 · Long Sleeve Tees
Youth Triblend Long Sleeve T-Shirt
A blank long sleeve tee from the Augusta Sportswear line, offered in 4 colors and sizes M–L. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/38/12 polyester/cotton/rayon triblend knit at 3.8 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black Heather
Black Heather
Grey Heather
Navy Heather
Royal Heather
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| M | Limited | — | |
| L | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/38/12 polyester/cotton/rayon triblend knit
- Fabric weight
- 3.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Youth
- Fit
- Relaxed
- Sizes
- M–L
- Colors
- 4
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Relaxed fit, cut for youth wear · sizes M–L.
Garment measurements in inches, laid flat.
| Measurement | S | M | L |
|---|---|---|---|
| Body Length | 22 1/8 | 23 7/8 | 26 |
| Chest Width (Laid Flat) | 14 1/2 | 16 | 17 1/2 |
| Sleeve Length (From Center Back) | 25 | 27 | 29 |
Fabric and construction
Manufacturer highlights
- 3.8 oz./yd², 50/38/12 polyester/cotton/rayon Triblend knit
- Relaxed fit
- Crewneck collar
- Set-in sleeves with rolled forward shoulder seam
- Tear away label
Country of origin
Made in Egypt.
Shown for the Black Heather colorway; origin can vary by color and production run.
Recommended applications
The stated attributes don't point to a specific program type — request a sample to evaluate it against your use case.
Similar alternatives
- · Similar weight (4 vs 3.8 oz)
- · Covers XS–XL
- · Similar weight (3.5 vs 3.8 oz)
- · Covers XS–XL
- · Similar weight (3.5 vs 3.8 oz)
- · Covers XS–XL
- · Similar weight (4 vs 3.8 oz)
- · Covers XS–XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Relaxed Fit
- Relaxed fit adds extra ease through the chest and body beyond a classic cut, without going as wide or long as an oversized silhouette.
- Crew neck
- A crew neck is a round, close-fitting neckline finished with a ribbed collar band, the default cut on most t-shirts, sweatshirts, and hoodies.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.