Shown: Black Heather
Augusta SportswearStyle 3067 · T-Shirts
Women's Triblend T-Shirt
A blank t-shirt from the Augusta Sportswear line, offered in 11 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 50/38/12 polyester/cotton/rayon triblend knit at 3.8 oz/yd²
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black Heather
Black Heather
Dark Green Heather
Grey Heather
Kelly Heather
Maroon Heather
Navy Heather
Orange Heather
Purple Heather
Red Heather
Royal Heather
White
Available sizes
Availability — Black Heather
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | Limited | — | |
| S | In Stock | — | |
| M | In Stock | — | |
| L | Low Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 50/38/12 polyester/cotton/rayon triblend knit
- Fabric weight
- 3.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 11
- Country of origin
- Egypt
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 25 1/4 | 26 1/4 | 27 | 27 3/4 | 28 1/2 | 29 1/4 | 30 |
| Chest Circumference | 35 1/2 | 37 1/2 | 39 1/2 | 42 1/2 | 46 | 50 | 54 |
Fabric and construction
Manufacturer highlights
- 3.8 oz./yd², 50/38/12 polyester/cotton/rayon triblend knit
- Crewneck collar
- Set-in sleeves with rolled forward shoulder seam
- Tear away label
Country of origin
Made in Egypt.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Events →
Event-crew staple with quick decoration turnaround.
Similar alternatives
- · Same fabric: 50/38/12 polyester/cotton/rayon triblend knit
- · Similar weight (3.8 vs 3.8 oz)
- · Covers XS–2XL
- · Same fabric: 50/38/12 polyester/cotton/rayon triblend knit
- · Similar weight (3.8 vs 3.8 oz)
- · Covers S–4XL
- · Similar fiber mix
- · Similar weight (4.2 vs 3.8 oz)
- · Covers S–3XL
- · Similar fiber mix
- · Similar weight (4.3 vs 3.8 oz)
- · Covers XS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Tri-Blend
- Tri-blend fabric mixes cotton, polyester, and rayon in one yarn, producing an especially soft, drapey tee with a naturally heathered, faded print look.
- Crew neck
- A crew neck is a round, close-fitting neckline finished with a ribbed collar band, the default cut on most t-shirts, sweatshirts, and hoodies.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.