Shown: Black
Augusta SportswearStyle 2606 · More Styles
Men's Hyperform Compression Half Sleeve Shirt
A blank garment from the Augusta Sportswear line, offered in 4 colors and sizes S–2XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 84/16 polyester/spandex knit at 5.3 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Black
Black
Graphite
Navy
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — | |
| 2XL | Inventory Unavailable | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 84/16 polyester/spandex knit
- Fabric weight
- 5.3 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–2XL
- Colors
- 4
- Country of origin
- Mexico
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–2XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 26 | 26 3/4 | 27 1/2 | 28 1/4 | 29 | 29 3/4 |
| Chest Circumference | 29 | 32 | 35 | 38 | 42 | 46 |
| Sleeve Length (From Center Back) | 17 1/2 | 18 1/4 | 19 | 19 3/4 | 20 1/2 | 21 1/4 |
Fabric and construction
Manufacturer highlights
- 5.3 oz./yd², 84/16 polyester/spandex knit
- Moisture-wicking performance
- Four-way stretch fabric for increased mobility
- Odor-resistant
- Ultra tight fit
- Flatlock stitching provides comfort and resists chafing
- Raglan sleeves
- Pad print label
Country of origin
Made in Mexico.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 84/16 polyester/spandex knit
- · Similar weight (5.3 vs 5.3 oz)
- · Similar weight (5.3 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (5.8 vs 5.3 oz)
- · Covers S–4XL
- · Similar weight (5 vs 5.3 oz)
- · Covers S–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Odor-Resistant
- Odor-resistant fabric carries an antimicrobial treatment — usually silver ion or a branded finish like Polygiene — that slows the bacteria causing sweat smell between washes.
- Flatlock Seam
- A flatlock seam joins two fabric edges by overlapping and stitching them flat, with no raised ridge on either side, common on athletic and performance garments.
- Raglan Sleeve
- A raglan sleeve is cut in one piece with the shoulder, creating a diagonal seam from underarm to collar instead of a rounded shoulder seam.