Shown: Black
Artisan Collection by ReprimeStyle RP664 · Jackets & Vests
Unisex Ten Studded Front Short Sleeve Chef Coat
A blank jacket from the Artisan Collection by Reprime line, offered in 2 colors and sizes XS–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 65/35 polyester/cotton at 5.8 oz/yd²
- OEKO-TEX certified facility
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 2— Black
Black
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | Limited | Available |
Last inventory sync: July 14, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/cotton
- Fabric weight
- 5.8 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Unisex
- Fit
- Not stated
- Sizes
- XS–3XL
- Colors
- 2
- Country of origin
- Bangladesh
- Sustainability
- OEKO-TEX certified facility
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for unisex wear · sizes XS–3XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Body Length | 30 | 30 | 30 | 30 | 30 | 30 | 30 |
| Chest Width (Laid Flat) | 36 | 40 | 42 | 46 | 48 | 52 | 56 |
| Pocket Size - Side | Left sleeve pocket 4 18/25 D x 2 9/25 W |
Fabric and construction
Manufacturer highlights
- 5.8 oz. (US), 9.7 oz./L yd (CA), 65/35 polyester/cotton
- Mandarin collar with topstitching
- Ten press stud front fasteners
- Double pen pocket on left sleeve
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS and OEKO-TEX certified.
Country of origin
Made in Bangladesh.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Hospitality →
Built for kitchen and front-of-house programs.
Similar alternatives
- · Same fabric: 65/35 polyester/cotton
- · Similar weight (5.8 vs 5.8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5.8 vs 5.8 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Similar weight (5.8 vs 5.8 oz)
- · Also Excellent for embroidery
- · Same fabric: 65/35 polyester/cotton
- · Also Excellent for embroidery
- · Covers S–3XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mandarin collar (band collar)
- A mandarin collar, also called a band collar, is a short standing strip of fabric around the neckline with no fold and no lapel.
- Topstitching
- Topstitching is a visible line of stitching sewn on the outside face of a finished garment, often in contrast thread, used to reinforce edges or add styling detail.
- OEKO-TEX Standard 100
- OEKO-TEX Standard 100 is a certification testing finished textile products for harmful substances against limits stricter than most legal requirements.