Shown: Alloy Heathered
ANETIKStyle MVLPRS0 · T-Shirts
Men's Low Pro Tech T-Shirt
A blank t-shirt from the ANETIK line, offered in 8 colors and sizes XL–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 88/12 polyester/spandex at 6.1 oz/yd²
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 8— Alloy Heathered
Alloy Heathered
Bahama Heathered
Charcoal Heathered
Dark Olive Heathered
Midnight Heathered
Navy Heathered
Olive Heathered
White Heathered
Available sizes
Availability — Alloy Heathered
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XL | Limited | — | |
| 2XL | In Stock | — | |
| 3XL | Limited | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 polyester/spandex
- Fabric weight
- 6.1 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tagless
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XL–3XL
- Colors
- 8
- Country of origin
- Cambodia
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XL–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length | 28 1/2 | 29 3/8 | 30 1/8 | 31 | 31 7/8 | 33 |
| Chest Width (Laid Flat) | 20 1/8 | 21 1/8 | 22 5/8 | 23 5/8 | 25 1/8 | 25 5/8 |
Fabric and construction
Manufacturer highlights
Country of origin
Made in Cambodia.
Shown for the White Heathered colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Events →
Event-crew staple with quick decoration turnaround.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Similar weight (6 vs 6.1 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Similar weight (6.1 vs 6.1 oz)
- · Also Excellent for embroidery
- · Similar weight (5.9 vs 6.1 oz)
- · Also Excellent for embroidery
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.