Shown: Black
Women's Stretch Quarter-Zip Fleece Pullover
A blank fleece pullover from the AllPro line, offered in 6 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 62/33/5 polyester/rayon/spandex at 9 oz/yd²
- OEKO-TEX certified facility
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Heather Steel
Navy
Red
Royal
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 62/33/5 polyester/rayon/spandex
- Fabric weight
- 9 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Side-seamed
- Label
- Tear-away label
- Cut for
- Women's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 6
- Country of origin
- Bangladesh
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for women's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length Front | 24 | 25 | 26 | 27 | 28 | 29 |
| Chest Width (Laid Flat) | 18 1/2 | 19 1/2 | 21 1/2 | 23 1/2 | 25 1/2 | 27 1/2 |
| Sleeve Length (From Center Back) | 30 3/4 | 31 1/2 | 32 1/2 | 33 1/4 | 34 | 34 3/4 |
Fabric and construction
Manufacturer highlights
- 9 oz./yd², 62/33/5 polyester/rayon/spandex
- Moisture-management performance
- Crafted for warmth and flexibility
- Shaped, feminine fit
- Self-fabric cadet collar
- Dyed-to-match locking zipper with top shelf fabric garage
- Side seams
- Tear away label for comfort and relabeling
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Bangladesh.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 62/33/5 polyester/rayon/spandex
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Similar weight (9 vs 9 oz)
- · Also Excellent for embroidery
- · Covers S–3XL
- · Also Excellent for embroidery
- · Covers S–2XL
- · Also Excellent for embroidery
- · Covers XS–2XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Rayon (Viscose)
- Rayon (viscose) is a semi-synthetic fiber made by dissolving wood pulp cellulose and re-spinning it into filament, prized for a silky drape neither cotton nor polyester can match.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Cadet collar
- A cadet collar is a short, stand-up, zippered collar with no fold, most often found on quarter-zip pullovers and track-style jackets.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.
- Relabeling
- Relabeling is removing a garment's factory tag and sewing or pressing in a custom brand label, the physical step private label requires.