Shown: Black
Men's Tall Pique Polo
A blank polo from the AllPro line, offered in 6 colors and sizes LT–4XLT. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 65/35 polyester/cotton pique at 6 oz/yd²
- OEKO-TEX certified facility
- Tear-away label for rebranding
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 6— Black
Black
Heather Granite
Navy
Red
Royal
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| LT | In Stock | Available | |
| XLT | In Stock | Available | |
| 2XLT | In Stock | Available | |
| 3XLT | In Stock | Available | |
| 4XLT | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 65/35 polyester/cotton pique
- Fabric weight
- 6 oz/yd²
- Fabric type
- piqué
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Tear-away label
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- LT–4XLT
- Colors
- 6
- Country of origin
- Bangladesh
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Textured piqué surface — expect some ink gain; a higher-mesh screen and an underbase help keep edges clean.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat piqué surface reduces DTG detail.
Embroidery
Excellent
Structured piqué holds stitches cleanly — the classic embroidery surface.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes LT–4XLT.
Garment measurements in inches, laid flat.
| Measurement | LT | XLT | 2XLT | 3XLT | 4XLT |
|---|---|---|---|---|---|
| Body Length | 32 1/2 | 33 1/2 | 34 1/4 | 35 | 35 3/4 |
| Chest Width (Laid Flat) | 23 | 25 | 27 | 29 | 31 |
| Sleeve Length (From Center Back) | 19 3/4 | 21 1/4 | 22 3/4 | 24 1/4 | 25 3/4 |
Fabric and construction
Manufacturer highlights
- 6 oz./yd² (US), 10 oz./L yd (CA), 65/35 polyester/cotton pique
- Wrinkle-resistant
- Soil releasing
- Tall fit
- Ribbed collar
- Three dyed-to-match buttons
- Tear away label for comfort and relabeling
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Bangladesh.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
Similar alternatives
- · Same fabric: 65/35 polyester/cotton pique
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Same fabric: 65/35 polyester/cotton pique
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers LT–3XLT
- · Similar fiber mix
- · Also Excellent for embroidery
- · Covers LT–3XLT
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Piqué
- Piqué is a woven-look knit with a raised, waffle-textured face, most familiar as the classic polo-shirt fabric, structured enough that printers usually route it to embroidery.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.
- Tall Sizes
- Tall sizes add extra body and sleeve length to a standard size, usually 2-3 inches, without changing the chest width, for wearers whose height outpaces standard proportions.
- Ribbed Collar
- A ribbed collar is a stretchy rib-knit neckband, usually 1x1 rib, whose recovery after stretching depends heavily on how much spandex is blended in.
- Tear-Away Label
- A tear-away label is a neck or side-seam tag stitched along a single perforated line so it pulls out cleanly by hand for private labeling.