Shown: Black
Men's Pro-Flex Sorona® Polo
A blank polo from the AllPro line, offered in 11 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 60/40 polyester/sorona® with pro-flex technology at 4.5 oz/yd²
- 8-size run (XS–4XL)
- OEKO-TEX certified facility
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 11— Black
Black
Cloud Blue
Forest Green
Greystone
Maroon
Navy
Olive Green
Pacific Blue
Sand
Smoke
White
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 60/40 polyester/sorona® with pro-flex technology
- Fabric weight
- 4.5 oz/yd²
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS–4XL
- Colors
- 11
- Country of origin
- Bangladesh
- Sustainability
- OEKO-TEX certified facility; Fair Labor Association
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 26 1/2 | 27 1/2 | 28 1/2 | 29 1/2 | 30 1/2 | 31 1/2 | 32 1/2 | 33 1/4 |
| Chest Width (Laid Flat) | 17 | 19 | 21 | 23 | 25 | 27 | 29 | 31 |
Fabric and construction
Manufacturer highlights
- 4.5 oz./yd² (US), 7.5 oz./L yd (CA), 60/40 polyester/Sorona® with Pro-Flex technology
- Pin-dot mesh enhances ventilation
- High Stretch and recovery, with an exceptional hand feel
- Fade resistant and significantly reduces environmental impact
- Wrinkle-resistant
- Standard fit
- Self-fabric collar with collar stand
- Rolled forward shoulder
- Three dyed-to-match buttons
- Soft woven label
About this blank
Responsible Supplier: this product was made in a facility that is OEKO-TEX and FLA certified.
Country of origin
Made in Bangladesh.
Shown for the White colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Similar weight (5 vs 4.5 oz)
- · Covers S–4XL
- · Similar weight (4.7 vs 4.5 oz)
- · Covers S–4XL
- · Similar weight (5 vs 4.5 oz)
- · Covers S–4XL
- · Similar weight (4.3 vs 4.5 oz)
- · Covers XS–4XL
Terms used on this page
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Hand (Hand Feel)
- Hand, or hand feel, is shop shorthand for how a finished print or fabric feels to the touch, the quality behind every request for a softer print.
- Wrinkle Resistance
- Wrinkle resistance is a fiber blend or chemical finish that keeps fabric from creasing, letting shirts come off the shelf looking pressed and stay that way.
- Self-fabric collar
- A self-fabric collar is a polo collar cut from the same piqué or jersey yardage as the shirt body instead of a separately knitted piece.
- Collar stand
- A collar stand is the reinforced band between the neckline seam and the collar fold that holds a shirt or polo collar upright instead of collapsing flat.