Shown: Black/ Silver
Alleson AthleticStyle 532CJ · T-Shirts
Men's Crewneck Pullover Baseball Jersey
A blank t-shirt from the Alleson Athletic line, offered in 13 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for sublimation
- 100% extreme diamond mock mesh cationic polyester
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ DTF transfer: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 13— Black/ Silver
Black/ Silver
Black/ White
Forest/ Gold
Gold/ Black
Navy/ Burnt Orange
Navy/ Red
Navy/ White
Orange/ Black
Purple/ Black
Red/ Navy
Red/ White
Royal/ Red
Royal/ White
Available sizes
Availability — Black/ Silver
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Limited | — | |
| M | Limited | — | |
| L | Low Stock | — | |
| 3XL | Low Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% extreme diamond mock mesh cationic polyester
- Fabric weight
- Not stated
- Fabric type
- mesh
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S–3XL
- Colors
- 13
- Country of origin
- Madagascar
- Sustainability
- Not stated
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Conditional
Open or slick mesh surface — adhesion varies; run a wash test first.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
- Non-flat mesh surface reduces DTG detail.
Embroidery
Good
Embroiders well with appropriate backing.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Across Shoulders | 17 1/4 | 18 1/4 | 19 1/4 | 20 1/4 | 21 1/4 | 22 1/4 |
| Body Length | 29 | 30 | 31 | 32 | 33 | 34 |
| Chest Width (Laid Flat) | 19 | 21 | 23 | 25 | 27 | 29 |
Fabric and construction
Manufacturer highlights
- 100% eXtreme diamond mock mesh cationic polyester with moisture-management
- Contrast color modified raglan yoke and set-in sleeves
- Straight hemmed sleeve and bottom
Country of origin
Made in Madagascar.
Shown for the Black/ Silver colorway; origin can vary by color and production run.
Recommended applications
Similar alternatives
- · Also Excellent for sublimation
- · Covers S–3XL
- · Also Excellent for sublimation
- · Covers S–4XL
- · Also Excellent for sublimation
- · Covers S–3XL
- · Also Excellent for sublimation
- · Covers S–3XL
Terms used on this page
- Mesh
- Mesh is an open-construction knit fabric with visible holes for airflow, used in athletic jerseys, cap back panels, and moisture-wicking gear.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- Yoke
- A yoke is the separate fabric panel seamed across a shirt's upper back, and where that seam sits sets how low a back print can start.
- Set-In Sleeve
- A set-in sleeve is a sleeve sewn separately into a rounded armhole, the standard construction behind most classic crew-neck t-shirts.