Shown: Black
AdidasStyle A520 · More Styles
Men's Ultimate365 Lightweight Shoulder Stripe Quarter-Zip Pullover
A blank garment from the Adidas line, offered in 5 colors and sizes XS–4XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery
- 88/12 recycled polyester/elastane at 6 oz/yd²
- 8-size run (XS–4XL)
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 5— Black
Black
Glory Blue
Grey Three
Team Navy Blue
Team Power Red
Available sizes
Availability — Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| XS | In Stock | Available | |
| S | In Stock | Available | |
| M | In Stock | Available | |
| L | In Stock | Available | |
| XL | In Stock | Available | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | Available | |
| 4XL | In Stock | Available |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 88/12 recycled polyester/elastane
- Fabric weight
- 6 oz/yd²
- Fabric type
- jersey
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- XS–4XL
- Colors
- 5
- Country of origin
- Viet Nam
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes XS–4XL.
Garment measurements in inches, laid flat.
| Measurement | XS | S | M | L | XL | 2XL | 3XL | 4XL |
|---|---|---|---|---|---|---|---|---|
| Body Length | 26 7/9 | 27 5/9 | 28 1/3 | 29 1/7 | 30 | 31 | 31 8/9 | 32 7/8 |
| Chest Circumference | 39 | 41 1/3 | 44 1/2 | 47 2/3 | 50 4/5 | 54 5/7 | 58 2/3 | 63 2/5 |
| Sleeve Length | 31 1/7 | 31 3/5 | 32 | 32 2/3 | 33 1/3 | 34 | 34 4/5 | 35 3/5 |
Fabric and construction
Manufacturer highlights
- 6 oz./yd², 88/12 recycled polyester/elastane
- Moisture-management properties
- Self-mock collar
- Striped jersey shoulder panels
- Bottom hem and cuffs
- Contrast silicone logo on right sleeve
- Responsible Materials: contains 88% recycled polyester
- Please note adidas products cannot be exported internationally
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified.
Adidas products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third party site (i.e., Amazon, Craigslist, eBay, WalMart, etc) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Viet Nam.
Shown for the Black colorway; origin can vary by color and production run.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 88/12 recycled polyester/elastane
- · Similar weight (6 vs 6 oz)
- · Also Excellent for embroidery
- · Similar weight (6.5 vs 6 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (5.9 vs 6 oz)
- · Also Excellent for embroidery
- · Covers S–4XL
- · Similar weight (6.1 vs 6 oz)
- · Also Excellent for embroidery
- · Covers XS–4XL
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- GOTS (Global Organic Textile Standard)
- GOTS (Global Organic Textile Standard) is a certification verifying organic fiber content plus environmentally and socially responsible processing across the entire textile supply chain.