Shown: Collegiate Navy Melange
AdidasStyle A475 · More Styles
Men's Lightweight Mélange Quarter-Zip Pullover
A blank garment from the Adidas line, offered in Collegiate Navy Melange in size S. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- Excellent for embroidery and sublimation
- 100% recycled polyester at 5.6 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 1— Collegiate Navy Melange
Collegiate Navy Melange
Available sizes
Availability — Collegiate Navy Melange
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | Low Stock | — |
Last inventory sync: July 13, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 100% recycled polyester
- Fabric weight
- 5.6 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Not stated
- Sizes
- S
- Colors
- 1
- Country of origin
- Jordan
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
- Moisture-management finishes can reduce adhesion — verify wash durability on a test piece.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Excellent
Midweight-plus fabric supports dense stitch counts without distortion.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
- Verify transfer adhesion over moisture-management finishes.
Sublimation
Excellent
High-polyester fabric accepts sublimation dye fully.
- Sublimation shows only on white or very light garment colors.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Fit category not stated, cut for men's wear · sizes S.
Garment measurements in inches, laid flat.
| Measurement | S |
|---|---|
| Body Length | 27 1/2 |
| Chest Circumference | 41 1/4 |
| Sleeve Length | 25 3/4 |
Fabric and construction
Manufacturer highlights
- 5.6 oz./yd² (US), 9.3 oz./L yd (CA), 100% recycled polyester interlock knit
- Moisture-management properties
- UPF 50+ rating
- Self-fabric mock collar
- Open hem sleeves
- Contrast logo on right sleeve
- Responsible Materials: contains 100% recycled polyester
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified.
Please note: adidas products can only be shipped within the countries where they are sold (U.S and Canada). Export outside these countries is not permitted.
Adidas products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third-party site (i.e., Amazon, Craigslist, eBay, Walmart, etc) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Jordan.
Recommended applications
- Contractor apparel →
Heavyweight fabric stands up to jobsite wear.
- Fitness →
Moisture-management fabric for active wear.
Similar alternatives
- · Same fabric: 100% recycled polyester
- · Similar weight (6 vs 5.6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% recycled polyester
- · Similar weight (5.9 vs 5.6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% recycled polyester
- · Similar weight (5.8 vs 5.6 oz)
- · Also Excellent for embroidery
- · Same fabric: 100% recycled polyester
- · Similar weight (6.1 vs 5.6 oz)
- · Also Excellent for embroidery
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Interlock Knit
- Interlock knit is a double-knit fabric formed by interlocking two 1x1 rib layers back-to-back, giving a smooth, identical face on both sides.
- UPF (Ultraviolet Protection Factor)
- UPF rates how much UV radiation a fabric blocks, from 15 (good) to 50+ (excellent, blocking over 97.5% of rays), tested under AATCC 183.
- Mock neck
- A mock neck is a short, snug stand-up collar, usually 1 to 2 inches tall, that mimics a turtleneck's silhouette without folding over.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.
- GOTS (Global Organic Textile Standard)
- GOTS (Global Organic Textile Standard) is a certification verifying organic fiber content plus environmentally and socially responsible processing across the entire textile supply chain.