Shown: Carbon/ Black
Men's Ultimate365 Pencil Stripe Climacool Polo
A blank polo from the Adidas line, offered in 4 colors and sizes S–3XL. Cataloged on VisePrint with full fabric specs and decoration-ready details.
- 85/15 recycled polyester/elastane at 4.4 oz/yd²
- Recycled content
- ⚠ DTG printing: not recommended — Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- ⚠ Embroidery and Sublimation: conditional — test first.
Final pricing depends on garment quantity, decoration method, print locations, and artwork requirements.
Colors 4— Carbon/ Black
Carbon/ Black
Crystal Sky/ Lucid Ray Blue
White/ Collegiate Navy
White/ Wonder Sage
Available sizes
Availability — Carbon/ Black
| Size | Status | Local pickup (Chicagoland) | Actions |
|---|---|---|---|
| S | In Stock | Available | |
| M | In Stock | — | |
| L | In Stock | — | |
| XL | In Stock | — | |
| 2XL | In Stock | Available | |
| 3XL | In Stock | — |
Last inventory sync: July 12, 2026 · local pickup stock held near Lockport, IL. Distributor network totals — not live stock; availability is reconfirmed on every quote before production.
Key specifications
- Fabric composition
- 85/15 recycled polyester/elastane
- Fabric weight
- 4.4 oz/yd²
- Fabric type
- Not stated
- Yarn
- Not stated
- Construction
- Not stated
- Label
- Not stated
- Cut for
- Men's
- Fit
- Classic
- Sizes
- S–3XL
- Colors
- 4
- Country of origin
- Viet Nam
- Sustainability
- Recycled content
Decoration compatibility
VisePrint guidance derived from this garment's stated fabric and construction — not manufacturer claims.
Screen printing
Good
Prints well with a low-bleed ink system made for polyester; standard plastisol can dye-migrate.
- Dye-migration risk on polyester content — use a low-bleed or poly-specific ink system and cure at lower temperatures.
- Stretch content — use an ink with good elongation to avoid cracking.
DTF transfer
Good
Compatible with this fabric type at correct press temperature and pressure.
- High press heat can affect polyester — test temperature and dwell time before a full run.
DTG printing
Not Recommended
Polyester-dominant fabric is a poor DTG substrate; choose DTF or screen printing instead.
- Water-based DTG ink absorbs poorly into polyester and can wash out — pretreat and test.
Embroidery
Conditional
Very light fabric can pucker under dense designs — keep stitch counts modest and stabilize well.
- Lightweight or performance knit — use a stabilizer/backing to prevent puckering.
- Stretch fabric — hoop with light tension and use a ballpoint needle.
Heat transfer
Good
Standard HTV and transfers apply well at the correct temperature for this fiber mix.
- Use low-temperature transfer material to avoid scorch or dye migration on polyester.
Sublimation
Conditional
Partial polyester content gives muted, distressed color rather than full saturation.
- Cotton content will not hold sublimation dye — expect a faded, vintage result.
Decoration results can vary by equipment, ink, transfer material, garment color, and production settings. Always test before beginning a full production run.
Fit and sizing
Classic fit, cut for men's wear · sizes S–3XL.
Garment measurements in inches, laid flat.
| Measurement | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|
| Body Length Back | 28 1/3 | 29 1/7 | 30 | 30 5/7 | 31 2/3 | 32 2/3 |
| Chest Circumference | 40 1/6 | 43 1/3 | 46 1/2 | 49 3/5 | 53 1/2 | 57 1/2 |
Fabric and construction
Manufacturer highlights
- 4.4 oz./yd², 85/15 recycled polyester/elastane
- Regular fit
- Three-button placket
- Side vents
- Contrast embroidered logo on left sleeve
- Responsible Materials: contains 85% recycled polyester
- Please note adidas products cannot be exported internationally
About this blank
Responsible Supplier: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified.
Adidas products purchased from us must be sold with embellishment. Re-selling from an unauthorized retail store, web site or any third party site (i.e., Amazon, Craigslist, eBay, WalMart, etc) is strictly prohibited. Failure to adhere to these terms will result in loss of privilege to sell the brand.
Country of origin
Made in Viet Nam.
Shown for the Carbon/ Black colorway; origin can vary by color and production run.
Recommended applications
- Company uniforms →
Placket-front knits and wovens are the uniform-program standard.
Similar alternatives
- · Similar weight (4.9 vs 4.4 oz)
- · Classic fit
- · Covers S–4XL
- · Similar weight (4.6 vs 4.4 oz)
- · Classic fit
- · Covers S–3XL
- · Similar weight (4.4 vs 4.4 oz)
- · Classic fit
- · Covers S–3XL
- · Similar weight (4.6 vs 4.4 oz)
- · Classic fit
Terms used on this page
- Recycled Polyester (rPET)
- Recycled polyester (rPET) is polyester fiber re-extruded from reclaimed plastic, mostly PET bottles, performing like virgin poly while supporting a garment's sustainability claim.
- Spandex (Elastane)
- Spandex, also called elastane, is a synthetic stretch fiber blended in small percentages into fitted and athletic apparel to add four-way stretch and recovery.
- Classic Fit
- Classic fit is the roomy, straight-cut 'full cut' T-shirt silhouette with generous body ease and minimal waist taper, built to fit the broadest range of body types.
- Placket
- A placket is the reinforced, buttoned front opening on a polo or henley, and its width and length set the boundary for where a left-chest logo can sit.
- Side Vents (Split Hem)
- Side vents, or split hem, are small slits left open at the bottom of a shirt's side seams, adding ease of movement and a retail-styled look.
- Polyester
- Polyester is a synthetic, petroleum-based fiber prized for durability, quick-dry performance, and colorfastness, but prone to dye migration under screen-print inks.